This is a must when maintaining a lot of machines using for instance a serial line console. The array already has a hotspare. LinuxRaidForAdmins last modified Select the item in which the cursor is positioned. Hook interrupt default Bypass interrupt hooks. Many thanks to them for good work!

Uploader: Katilar
Date Added: 27 May 2016
File Size: 68.27 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 36577
Price: Free* [*Free Regsitration Required]

When the system is powered on, the RAID volumes are automatically activated and resynchronization is automatically performed.

One of the disk drives fueion-mpt be set up as a hotspare disk if a RAID 1 mirroring volume is already set up. The View Array screen shown below allows you to view the current array configuration. Device name unknown PCI: Press Y to start the synchronization, or N to cancel it. When the volume has been fully configured, press C and select Save changes, then exit this menu to commit the changes. The Advanced Adapter Properties screen shown below allows you to view and modify infrequently accessed adapter settings.

It is designed for systems requiring redundancy and high availability, but not requiring a full-featured RAID implementation. The Manage Array screen shown below is used to manage the current array. Then exit to continue the boot process. Also, afacli requires libraries that are no longer available in Debian distributions.


Скачать ASUS PIKE 1068E LSI Fusion-MPT SAS Драйвер (Storport) v.­4.­24.­00.­00-1 для Linux

An array can become inactive if, for example, it is removed from one controller or computer and moved to another one. When you press Enter, the following prompt appears: Hosting provided by Metropolitan Area Network Darmstadt. Alternate CHS Mapping utilizes an alternate, possibly less efficient, mapping that may be das if a device is moved between adapters cusion-mpt different vendors.

By doing this, it decreases reliability because the failure of any drive within the striped volume results in a complete loss of data.

LSIFusionMPT – HWraid

Press C to create a new array. There are several ways to physically locate a disk drive, as long as the firmware is correctly configured and the drives support disk location. Press Lsl or Sa to add or remove an adapter to or from the boot order.

Note – When activating two arrays typically after a motherboard replacement the status of the second array is shown as “degraded” according to the LSI BIOS as it waits to sync. If one volume is already configured, follow these steps to add a second volume. In arrays consisting of different sized drives, excess space on larger drives is unusable.

In most case, your controller ID will be 0.

Integrated Striping firmware is used. The counts stop when they reach their maximum value. Note – Even though multiple volumes can be created, the hotspare is a global hotspare. However, if removed, fusion-pt disk drives must first be labelled to make sure that they are placed back in the same disk bays from which they were removed when reinstalled.


If the device is part of an array of three or more disks, this field is the size that the disk makes up within the array.

Follow these steps to create a RAID 1 volume on an adapter that does not currently have a volume configured. Select the item in which the cursor is positioned. Well, you really have to see it. When a disk fails, it is rebuilt to lwi hotspare if one is available. The first disk will be mirrored onto the second disk, so the data you want to keep must be on the first disk added to the volume.

The status of the array. This field is used to delete the currently displayed RAID array.