Meanwhile, read the documentation for the expansion card to make any necessary hardware or software settings for the expansion card, such as jumpers, switches or BIOS configuration. You can insert the expansion cards to meet your needs. The appearance of your mainboard may vary depending on the model you purchase. If you do not have the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer. Do not cover the openings.
|Date Added:||17 December 2012|
|File Size:||49.80 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Turn over the mainboard, and install the backplate to the proper position. For the latest information about CPU, please visit http: Position the cooling set onto the retention mechanism.
MSI K7N2GM-L, Socket A, AMD (MS) Motherboard | eBay
Operation is subject to the following two conditions: Each Serial ATA connector can connect to 1 hard disk device. Open Lever Sliding Plate 90 degree 2.
Overheating Overheating will seriously damage the CPU and system, always make sure the cooling vee can work properly to protect the CPU from overheating. If you do not have the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer. Look for the gold arrow on the CPU. W e take every care in the preparation of this document, but no guarantee is given vwr to the correctness of its contents.
Also, desktop platforms with PCI Express Architecture will be designed to ve highest performance in video, graphics, multimedia and other sophisticated applications. Please do not fold the Serial ATA cable into degree angle. Press the CPU down firmly into the socket and close the lever.
The module will only fit in the right orientation.
MSI BIOS for MSI Motherboards MS-7518
Replace only with the same or equivalent type recommended by the manufacturer. Correc t CP U placement 4. Make sure to raise the lever up to a degree angle. Do not cover the openings. If the mainboard has a System Hardware Monitor chipset onboard, 75188 must use a specially designed fan with speed sensor to take advantage of the CPU fan control. Align the retention mechanism and the backplate.
MSI Ms P6ngm2 Motherboard SKT Ddr2 NVIDIA Mcp73pv | eBay
However, please make sure your components are able to tolerate such abnormal setting, 5718 doing overclocking. Otherwise, the Line-Out connector on the back panel will not function. Then push it in until the golden finger on the memory module is deeply inserted in the socket. Our products are under continual improvement and we reserve the right to make changes without notice.
MSI K7N2GM-L, Socket A, AMD (MS-6777) Motherboard
However, memory modules of the same type and density are required while using dual-channel DDR, or instability may happen. To clear CMOS you should: Then push down the power vsr firmly into the connector.
The openings on the enclosure are for air convection hence protects the equipment from overheating. Revision History Revision V1. The plastic clip at each side of the DIMM slot will automatically close. IDE1 can connect a Master and a Slave drive. As the end user cannot boot without SP4, a combination installation CD must be created before attempting to install the operating system onto the bootable RAID volume. Before inserting the power supply connector, always make sure that all components are installed properly to ensure that no damage will be caused.
Notice 2 Shielded mz cables and A. If you install two hard disks on cable, you must configure the second drive to Slave mode by setting its jumper.
All cautions and warnings on the equipment should be noted.